Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 16)

Safety Instructions
16
Pay attention to the following points regarding installation and handling of the projector.
• If the projector will not be used for a long period of time, be sure
to remove the power plug from the power outlet to ensure safety.
Failure to do so presents a risk of fire if dust accumulates on the
plug or outlet.
• Parts of the cabinet around and above the exhaust vents may
become hot during projection. Touching these areas during
operation could cause burns to the hands. Pay particular
attention in preventing young children from touching these parts.
Additionally, do not place any metal objects around or above the
exhaust vents. Due to the heat from the projector, doing so could
cause an accident or personal injury.
• Do not place the projector where it may be exposed to oily smoke
or steam, such as near kitchen counters or humidifiers. Doing so
may cause fire or electric shock.
• Do not place any heavy objects on top of the projector or sit /
stand on it. Pay particular attention to prevent small children from
doing so. The projector may be knocked over and this could
result in damage or a personal injury.
• Do not place the projector on an unstable or slanted surface.
Doing so may cause the projector to fall or be knocked over and
could result in a personal injury.
• Do not place any objects in front of
the lens during projection. Also, do
not start projection with the lens
cap on. Doing so could cause a
fire.
• Presenters in front of the projector
should stand where the light does
not seem too bright, and where their shadow does not fall on the
screen.
When handling the lamp, pay attention to the following points.
• Be sure not to handle the lamp immediately after it has been
used. Be sure to switch off the power and wait for approximately
1 hour for the lamp and the projector to cool down sufficiently.
Failure to do so could result in a burn or personal injury due to
heat from the lamp or projector.