Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 54)

Connection Procedure
54
4K Projection
■ Definition of 4K
Several resolution specifications are described as being 4K, including 3840 x 2160,
3840 x 2400, 4096 x 2160, and 4096 x 2400, as shown in the following comparative
simulation.
The projector supports input signals at resolutions up to the maximum 4K resolution
of 4096 x 2400.
For details, check the table of supported signals. (
P177 )
■ 4K Digital Signal Compatibility
The projector is equipped with DVI-D and HDMI (2.0, HDCP 2.2*
1
) inputs.
DVI-D input is classified as single-link or dual-link, depending on the dot clock.
Projecting resolutions with a dot clock higher than 165 MHz requires a dual-link
plug and cable.
Main DVI-D input resolutions
• 1920 x 1200 (single-link; vertical frequency: 60 Hz)
• 2560 x 1600 (dual-link; vertical frequency: 60 Hz)
• 4096 x 2160 (dual-link; vertical frequency: 24 Hz)
Main HDMI 2.0 input resolutions
• 1920 x 1080 (vertical frequency: 60 Hz)
• 3840 x 2160 (vertical frequency: 60 Hz)
• 4096 x 2160 (vertical frequency: 60 Hz)
Resolution QFHD (3840 x 2160)
Frequency 24 Hz 60 Hz
Subsampling 422 444 422 444
Color depth 8 bit 10 bit 8 bit 10 bit 8 bit 10 bit 8 bit 10 bit
HDMI 1.4
(10.2 Gbps bandwidth) x 1
HDMI 2.0*
2
(18 Gbps bandwidth) x 1
1920 x 1080
3840 x 2160
4096 x 2400
Single-link plug
Dual-link plug