Settings for multi input mode – Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector User Manual
Page 57
57
Connection Procedure
B
asic
G
uide
Co
nne
ctio
n Proce
dur
e
■
Settings for Multi Input Mode
Select how to combine two HDMI inputs or four DVI inputs to form an image. Check
computer video output settings in advance, because you must match the display
layout (whether split-screen display or display in four quadrants).
For instructions on turning the projector on, see “Step 1 Turn the Projector On”
(
1
In the [Install settings] menu, select [Professional settings] > [Multi input
mode select].
2
Select the input mode to use.
Multi Input Mode
Specify the type of image (including resolution) supplied to the terminals. Use [Normal] for
most signals. For specific signals, use [Single], [1x2], [2x2], or [1x4] as needed. For
details, check the table of supported signals. (
)
• [Normal] setting
Supports many typical images, including [Single], [1x2], [2x2], and [1x4].
• [Single] setting
Supports many specialized signals using a single terminal.
• [1x2] setting
Supports many specialized signals using two input terminals.
• [2x2] setting
Supports many specialized signals using four input terminals, for projection in a 2x2
layout.
• [1x4] setting
Supports many specialized signals using four input terminals, for projection side by
side.