Canon REALiS 4K501ST Pro AV 5000-Lumen LCoS Projector - Manual (Page 182)

Product Specifications
182
* 1 With [Lamp mode] set to [Full power] and [Panel drive mode] set to [4096x2400]
*
2
Compliance with ISO21118-2012
*
3
Only low frequencies (24-30 Hz) supported
*
4
Only supported when [Panel drive mode] is set to [4096x2400]
* 5 EDID not supported
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels
may stay lit or unlit due to the characteristics of the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of
optical parts.
* Product specifications and appearance are subject to change without notice.
Inpu
t terminal
DVI-D terminal Digital PC (29-pin DVI connector)
HDMI terminal Digital PC, Digital video
LAN port
Network connection (RJ-45) 10BASE-T / 100BASE-TX /
1000BASE-T
USB port USB Type A
CONTROL port RS-232C (D-sub 9-pin)
REMOTE terminal Wired remote control (3.5ø stereo mini jack)
AUDIO IN terminal Audio signal (3.5ø stereo mini jack)
AUDIO OUT terminal Audio signal (3.5ø stereo mini jack)
Input signal
Digital PC TMDS (Transition Minimized Differential Signaling)
Audio Impedance = 47k Ω or more
Noise 39 / 34dB (Lamp mode: Full power/Power saver)
Operating temperature 0°C (32°F) - 40°C (104°F)
Power supply AC 100 V - 240 V 50 / 60Hz
Power consumption
Full power 600 W
Power saver 475 W
S
tandby
Networking off 0.4 W
Low-power networking
on
0.8 W
Dimensions
470 mm (W) x 175 mm (H) x 533.5 mm (D) /
18.5 (W) x 6.9 (H) x 21.0 (D) in (including the projection)
Mass 18 kg / 39.7 lbs
Accessories
Remote control, remote control dry-cell batteries, power cord,
lens cap, Important Information, User’s Manual (CD-ROM)
and Warranty Card
Model name 4K501ST