beautypg.com

Storing camera pan/tilt and zoom operations, Ptz trace function, Recording pan/tilt and zoom operations – Sony ICF-506 Portable Analog FM/AM Radio User Manual

Page 49: Playing pan/tilt and zoom operations, Deleting recorded pan/tilt and zoom operations, Adjust the operation start position of the camera

background image

49

Storing Camera Pan/Tilt
and Zoom Operations

– PTZ TRACE function

Up to 16 pan/tilt/zoom operation patterns can be stored
for up to 180 seconds.
This allows you to perform quick operations using the
remote commander, without displaying the menu.
To perform an operation without displaying the menu,
set PRESET MODE in the SYSTEM menu (page 40) to
TRACE.
To display the menu and perform an operation, see “PTZ
TRACE Menu” (page 43).

• If using the remote commander, pan/tilt and zoom

operations cannot be performed simultaneously.

• The menu and camera status are not displayed on the

screen.

• Recorded operations will be erased if the IMG FLIP

setting or camera operating frequency setting is
changed.

• Playing a recording will restore CLEAR IMAGE

ZOOM, RAMP CURVE, and PAN TILT SLOW to
their states held during recording.

• The camera supports up to 16 patterns of recorded

operations. The number of patterns that are supported
will vary depending on the device used.
- RM-IP500 (sold separately): Up to 16
- RM-IP10 (sold separately): Up to 16
- Remote commander (supplied): Up to 6

Recording pan/tilt and zoom
operations

1

Adjust the operation start position of the
camera.

2

Hold down the PRESET button and press
any of the POSITION1 to 6 buttons in which
you want to store the settings.

Recording starts.

3

Perform the pan/tilt and zoom operations
you want to record.

4

To stop recording, hold down the PRESET
button, and press the POSITION button
selected in step 2.

Playing pan/tilt and zoom
operations

1

Press one of the POSITION1 to 6 buttons.

The camera moves position to the playback start
position.

2

Press the same POSITION button again.

Playback starts.

Playback stops if a pan, tilt, or zoom operation is
performed during playback.

Deleting recorded pan/tilt and
zoom operations

Hold down the RESET button and press the desired
POSITION1 to 6 button for which you want to clear the
registered recording.

Notes

PO

WER

CAMERA SELECT

1

2

3

AU

TO

POSITION

HOME

STD

REV

BA

CK LIGHT

MANU

AL

FA

R

NEAR

W

T

W

T

1

2

3

4

5

6

PAN-TI

LT

L/R

DIRECTION SET

PA

N-

TI

LT

RESET

DA

TA SCREEN

RESET

RESET

PRESET

SLO

W

FAST

ZOOM

FOCUS

1, 3

2, 4

POSITION 1~6

2, 4

PRESET

Note