Sony ICF-506 Portable Analog FM/AM Radio - Manual (Page 37)

37
FOCUS Menu
The FOCUS menu is used to select the focus mode.
MODE (Focus mode)
Select the focus mode.
AUTO: The camera focuses automatically.
MANUAL: You can focus manually. Adjust using the
supplied remote commander or optional remote
controller.
Press the MANUAL button and adjust the focus
manually when shooting the following objects.
• White walls and other objects without contrast
• Objects behind glass
• Objects with horizontal stripes
• Objects on which bright lights are cast or reflected
• Nightscapes and other dark objects with blinking
lights
• Lit objects shot with darkened exposure adjustment or
exposure compensation settings
PICTURE/OPTICAL
FILTER Menu
The PICTURE/OPTICAL FILTER menu is used to
adjust picture quality improvement features and optical
filters.
NOISE REDUCTION
You can obtain clearer images by removing unnecessary
noise (fixed pattern and randomized noise) with NOISE
REDUCTION. Choose from OFF or LEVEL 1 through
LEVEL 5. When you select ADVANCED, you can set
up 2D NR LEVEL and 3D NR LEVEL independently.
2D NR LEVEL
This is enabled when NOISE REDUCTION is
ADVANCED. Choose from OFF or LEVEL 1 through
LEVEL 5 for noise reduction.
3D NR LEVEL
This is enabled when NOISE REDUCTION is
ADVANCED. Choose from OFF or LEVEL 1 through
LEVEL 5 for noise reduction.
FLICKER CANCEL
When this is turned ON, the flicker correction feature
becomes enabled.
When this is turned OFF, the flicker correction feature
becomes disabled.
Depending on conditions such as the type of
illumination and shutter speed, the flicker correction
feature may not be effective.
If the frame rate is close to the power supply frequency,
the flicker correction feature may not be able to fully
remove flickers, even if it is enabled. If this happens, use
the electronic shutter.
We recommend turning OFF, FLICKER CANCEL
Notes
Note