Sony LA-EA5 A-Mount to E-Mount Adapter - Manual (Page 98)

Setup Menu List 98
Se
tt
ings
Rec Control
Setting the
recording control
function
Setting
SxS & AXS / AXS
Selects the recording target (only external recording (AXS
memory), or both external recording (AXS memory) and
recording to an SxS memory card in the camcorder) when
“Main Operation” in “Base Setting” of the System menu is set
to “AXS(R7/R5).”
Note
Recording is not performed if the AXS memory disables
recording even if “SxS & AXS” is set.
SDI Rec
Control
Setting the SDI
recording control
function
Setting
Off / HD SDI Remote I/F /
Parallel Rec
Controls recording/stop recording of external devices by the
SDI output signal.
HD SDI Remote I/F: Controls recording of the external
device connected to SDI OUT 1 to 4.
Parallel Rec: The XAVC Proxy recording with CBK-WA100
that is connected to SDI OUT 1/2 is synchronized with the
camcorder recording.
The clip name of the XAVC Proxy recording is the same as
the one of the camcorder recording.
Notes
• You can select “Parallel Rec” only when the following
system frequency and output format are available.
System frequency: 59.94, 50 / Output Format SDI(Main):
1920 × 1080 i, 1280 × 720 P
System frequency: 29.97, 25, 23.98 / Output Format
SDI(Main): 1920 × 1080 P
—“Main Operation” in “Base Setting” of the System menu
is set to other than “RGB.”
—Recording format is a format other than ProRes or
DNxHD.
If any of the following is set, you cannot select “Parallel
Rec.”
—“Setting” in “S&Q Motion” of the Camera menu is set
to “On.”
—“Setting” in “Interval Rec” of the Recording menu is set
to “On.”
—“Setting” in “Picture Cache Rec” of the Recording
menu is set to “On.”
• When connecting an external device using a USB cable, the
status is not displayed on the camcorder, and file transfer is
not available.
• CBK-WA100 with software version 3.0 or later can be used
on this camcorder.
Recording
Menu items Sub items and setting values Contents