Rec review, Focus magnifier, False color display – Sony LA-EA5 A-Mount to E-Mount Adapter User Manual
Page 47: Viewfinder double speed drive function
Useful Functions
47
Record
ing
The picture of XAVC 4K Class480/XAVC 4K
Class300/XAVC QFHD Class480/XAVC QFHD
Class300 or SStP SR-SQ 444/SStP SR-SQ 422,
and the picture signal of MPEG2 1920 × 1080 are
recorded simultaneously on one SxS memory
card.
The clip of XAVC 4K Class480/XAVC 4K
Class300/XAVC QFHD Class480/XAVC QFHD
Class300 or SStP SR-SQ 444/SStP SR-SQ 422 is
recorded under the XDROOT/Clip directory on
the SxS memory card, but the clip of MPEG2
1920 × 1080 is recorded under the XDROOT/Sub
directory on the SxS memory card, and the suffix
“S02” is added to the end of the clip name.
Notes
• This function cannot be used while in the Slow &
Quick Motion, Interval Rec, or Picture Cache Rec
mode.
• The MLUT setting is locked to “MLUT On” for the
MPEG2 Proxy video that is recorded simultaneously
when in the Cine EI mode.
Recording on the AXS and SxS memory
simultaneously
Set “Setting” in “Rec Control”
of the
Recording menu to “SxS & AXS,” while “Main
Operation” in “Base Setting”
of the
System menu is set to “AXS(R7/R5).”
You can simultaneously record pictures of RAW
format and pictures with formats set by “Rec
Format.”
You can review the last recorded clip on the
screen (Rec Review) by assigning the Rec
Review function to an assignable button
When you stop recording and press the assigned
button, the last 2 seconds of the clip are played.
When you press and hold the button for more than
1 second, the camcorder starts to rewind from two
seconds before of the last frame of the clip at 4×
speed. When you release the button, the
camcorder starts playback at that point.
Rec Review stops at the end of the clip, then
resumes STBY (recording standby) status.
Note
The Setup menus cannot be operated during Rec Review.
By pressing the FOCUS MAG button of the
viewfinder (DVF-L350, DVF-EL100, DVF-
L700) that is attached to the camcorder, you can
expand the center part of the viewfinder, and it is
easy to adjust the focus. After adjusting the focus,
press the button again to returns to the normal
(recording) screen.
It does not affect the recorded image or output
signal in the focus magnifier mode.
You can perform the false color display on the
viewfinder by pressing the SPARE button of the
viewfinder (DVF-EL100, DVF-L700) that is
attached to the camcorder.
For details about the false color display, refer to the
operating instructions of the DVF-EL100 or DVF-
L700.
Note
The false color display is available only when the
“Gamma” setting for the video signal that is output to the
viewfinder is set to “S-Log2.”
If the system frequency is 23.98P, 24P, 25P, or
29.97P, the image may be blurred and hard to see
because of low frame frequency when you shoot
while swaying the camcorder to the right and the
left.
In this case, you can decrease image blur and
make it easier to see by activating the viewfinder
double speed drive function.
To activate, set “Double Speed Drive” in “VF
Setting”
of the VF menu to “On.”
Notes
• This function is not effective on the following settings.
—System frequency is 59.94/50.
—Recording format is SStP SR-SQ 444/SStP SR-
Lite 422/SStP SR-SQ 422, ProRes 4444/ProRes
422 HQ/ProRes 422, DNxHD 220x/DNxHD 145.
—“Setting” in “Slow Shutter” of the Camera menu is
set to “On.”
—“Setting” in “S&Q Motion” of the Camera menu is
set to “On,” and the “Frame Rate” setting is 1 to
60P.
Rec Review
Focus Magnifier
False Color Display
Viewfinder Double Speed Drive
Function