Sony LA-EA5 A-Mount to E-Mount Adapter - Manual (Page 91)

Setup Menu List 91
Se
tt
ings
When there is a button or dial that corresponds to the menu item on the attached viewfinder, that item is
not available.
VF Menu
VF
Menu items Sub items and setting values Contents
VF Setting
Setting the
viewfinder
Color
–99 to +99 (± 0 )
Adjusts the color of pictures on the viewfinder.
Contrast
–99 to +99 (± 0 )
Adjusts the contrast of pictures on the viewfinder.
Brightness
–99 to +99 (± 0 )
Adjusts the brightness of pictures on the viewfinder.
Color Mode
Color / B&W
Selects the display mode of the viewfinder while E-E display/
recording.
Aspect
Auto / Full / Anamo ×1.3 /
Anamo ×2
Selects the displayed area of pictures for the viewfinder.
Anamo ×1.3 / Anamo ×2: Corrects the distortion of the
images on the viewfinder screen when using an anamorphic
lens. (This setting is available only when “Main Operation” in
“Base Setting” of the System menu is set to “AXS(R7/R5).”)
Double Speed Drive
On / Off
Turns on/off the function that doubles the frame rate for the
viewfinder display when the system frequency is 23.98, 24,
25, or 29.97.
(When this function is set to “On,” the settable range for
“Shutter Value” in “Shutter” of the Camera menu is limited to
180 degrees for the shutter angle.)
Notes
This function is not available on the following settings.
• System frequency is 50 or 59.94.
• “Setting” in “S&Q Motion” of the Camera menu is set to “On.”
• “Setting” in “Slow Shutter” of the Camera menu is set to
“On.”
• Recording format is set to SStP SR-SQ 444/SStP SR-Lite
422/SStP SR-SQ 422/DNxHD 220x/DNxHD 145/ProRes
4444/ProRes 422 HQ/ProRes 422.
• During playback or displaying thumbnail.
• When the AXS-R7 is attached, the recording format and
frame rate are 4K 120P.
Peaking
Setting the peaking
function
Setting
On / Off
Turns the peaking function on/off.
Peaking Type
Normal / Color
Selects the peaking type.
Normal: Normal peaking.
Color: Color peaking.
Frequency
Normal / High
Selects the peaking frequency from “Normal” (normal
frequency) or “High” (high frequency) during normal
peaking.
Normal Peaking Level
0 to 99 ( 50 )
Sets the normal peaking level.
Color
B&W / Red / Yellow / Blue
Selects the color of the peaking signal when “Peaking Type”
is set to “Color.”
Color Peaking Level
0 to 99 ( 50 )
Sets the color peaking level.