Sony LA-EA5 A-Mount to E-Mount Adapter - Manual (Page 142)

Specifications 142
Ap
pend
ic
es
Sensitivity (2000 lx, 89.9% reflectance)
PMW-F55
Video Gamma: T12@24p (3200K Light
source)
PMW-F5
Video Gamma: T14@24p (3200K Light
source)
ISO Sensitivity
PMW-F55
S-Log2 Gamma: ISO 1250 (D55 Light
source)
PMW-F5
S-Log2 Gamma: ISO 2000 (D55 Light
source)
Lens Mount
PL mount (with supplied lens mount
adaptor)
Flange Focal Length
FZ mount (without supplied lens mount
adaptor)
Latitude
14-stop
S/N Ratio
57 dB (Video Gamma, Noise
Suppression: OFF)
Shutter Speed
1/24s to 1/6,000s (23.98P)
Shutter Angle
4.2° to 359.7° (electronic shutter)
Slow Shutter (SLS)
2, 3, 4, 5, 6, 7, and 8-frame accumulation
Slow & Quick Motion Function
XAVC 4K/QFHD: 1P to 60P
XAVC 2K/HD: 1P to 180P
White Balance
Preset (3200K, 4300K, 5500K),
Memory
Gain
–3, 0, 3, 6, 9, 12, 18 dB
Gamma Curve
STD1, STD2, STD3, STD4, STD5,
STD6
HG1, HG2, HG3, HG4, HG7, and HG8
S-Log2, S-Log3
Audio Input
CH-1/CH-2: XLR-type 3-pin (female)
(×2), LINE / AES/EBU / MIC /
MIC+48V selectable
Video Output
TEST OUT: BNC (×1)
DC Input
XLR-type 4-pin (male), 11 V to 17 V
DC
DC Output
4-pin (×2), 11 V to 17 V DC (MAX
1.8 A) w/ battery adaptor
You can output the REC Tally signal and
input the REC Trigger signal through the
DC OUT connector.
Note
When connecting a device to the DC OUT
connector, use one with current consumption
of 1.8 A or less.
SDI Output
BNC (×4)
3G-SDI: SMPTE ST424/425 Level-B
HD SDI: SMPTE ST292 compliant
SD SDI: SMPTE-259M compliant
PMW-F55
HD mode:
SDI 1/2: Line Output
SDI 3/4: Monitor Output
4K mode:
SDI 1/2/3/4: Line Output
Display On/Off switchable
PMW-F5
SDI 1/2: Line Output
SDI 3/4: Monitor Output
Timecode Input/Output
TC IN/OUT: BNC (×1) switchable
Input/Output