Sony LA-EA5 A-Mount to E-Mount Adapter - Manual (Page 57)

Sub Display Setting Items 57
Se
tt
ings
AU/TC-2
AU/TC-3
CH2 Input Auto: Adjusts the recording level automatically.
Manual: Adjust the recording level manually from –99 to +99.
Note
If the AES/EBU signal is selected for the audio input signal, the recording level is locked.
When the CBK-55BK is attached
This item does not appear because the setting of this item follows the settings of the
AUDIO SELECT CH-2 switch and position of the LEVEL CH-2 knob on the CBK-
55BK.
CH2 Select Displays the input source for AUDIO IN CH2.
When the CBK-55BK is attached
The input source of AUDIO IN CH-2 on the rear of the CBK-55BK is displayed.
Item name Setting
Item name Setting
Monitor CH Selects the audio channel that is output to the headphones and speaker. (See page 86 for
the selectable item.)
When the CBK-55BK is attached
The status of the MONITOR switch on the CBK-55BK is displayed.
Monitor Level Adjusts the monitor volume from 0 to 99.
When the CBK-55BK is attached
This item does not appear because the setting of the item is adjusted on the MONITOR
knob on the CBK-55BK.
Item name Setting
Display Switches the indication for the time data (Timecode/Duration).
Reset Resets the timecode and counter to 00:00:00:00.
Set Sets the timecode to the desired value.
Mode Sets the timecode mode.
Preset (Ext): Starts the timecode from the specified value.
Int. Regen (regeneration): Starts the timecode from that of the previous clip.
Run Sets the condition for the timecode.
Rec Run: Advances the timecode during recording only.
Free Run: Keeps advancing regardless of the state of recording.
TC Source Displays the external lock status for the timecode.
Internal: The timecode is not locked when “S&Q Motion” is set to “Off” and timecode is
set to “Preset (Ext-Lk)” and “Free Run.”
External: The timecode is locked when “S&Q Motion” is set to “Off” and timecode is set
to “Preset (Ext-Lk)” and “Free Run.”
No indication: Other than above.