Roland VERSELAB MV1 Music Production Workstation - Manual (Page 48)

48
Main Specifications
Sound Generator ZEN-Core (Tone, Drum Kit)
Track Type Tone, Drum Kit, Looper (Audio Loop)
Maximum Polyphony
ZEN-Core: 128 voices (varies according to the sound generator load)
Looper: 8 (varies according to the available number of Looper track)
Vocal Take: 16 (varies according to the vocal take size)
Tracks 7 tracks and 1 vocal track
Sections 16 sections
Vocal Take 16 takes
Tones
Preset Tone: 3,000 or greater
Preset Drum Kit: 80 or greater
User Sample (as a Tone or Drum Kit): available by importing from SD card
* Available total time for User Sample and Vocal take: 12 minutes in mono, 6 minutes in stereo (44.1 kHz)
* Available format of User Sample: WAV 32–96 kHz/16-bit, 24-bit (mono, stereo)
Looper Sample (as a clip of Looper track): available by importing from SD card, recording via EXT IN/Tracks
* Available total time for Looper Sample: Approx. 60 sec (44.1 kHz)
* Available format of Looper Sample: WAV 44.1 kHz/16-bit, 24-bit, 32-bit, 32-bit float (mono, stereo)
Effects
Track Multi-Effects: 90 types
Track EQ
Chorus/Delay: 9 types
Reverb: 7 types
Master Effects: 90 types
Master Compressor
Master EQ
Step Sequencer
Maximum Step: 128 steps
* Available on a Tone or Drum Kit Track
Looper
Time Stretch, Pitch Shift
* Available on a Looper Track
Display 16 characters, 2 lines LCD (with backlit)
External Storage SD card (SDHC supported) for saving Project Data and Audio Data
Connectors
PHONES jacks: Stereo 1/4-inch phone type, Stereo miniature phone type
LINE OUT (L/MONO, R) jacks: 1/4-inch phone type
LINE IN (L/MONO, R) jacks: 1/4-inch phone type
MIC connector: XLR type (phantom power: +48 V, 10 mA Max.)
MIDI (IN, OUT) connectors
USB port: USB B type (Audio, MIDI)
DC IN jack
Power Supply
AC adaptor
Obtained via USB port (USB bus power)
Current Draw
2,000 mA (AC adaptor)
500 mA (USB bus power)
Dimensions
354 (W) x 208 (D) x 60 (H) mm
13-15/16 (W) x 8-3/16 (D) x 2-3/8 (H) inches
Weights
(excluding AC adaptor)
1.2 kg
2 lbs 11 oz
Accessories
Leaflet “Read Me First”
AC adaptor
SD card (installed in the product when shipped from the factory)
SD card protector
* This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.