ProSoft Technology RLX2-IHNF-WC - Manual (Page 59)

RLX2 Industrial Hotspot Series
ProSoft Technology, Inc. Page 59 of 212
June 15, 2015
D
I A G N O S T I C S A N D
T
R O U B L E S H O O T I N G
Use the program’s diagnostic and signal strength settings at the top of the Radio
Settings window to make sure the network is working properly:
 Signal Strength graph: This setting graphically shows the radio’s signal strength. The
graph will show the word Master if a master radio is selected. The graph will show
the word Scanning if the radio is scanning to find another radio to which to connect.
If the radio is not connected to a network and not currently scanning, the graph will
show the words Not Connected.
 Update every: To update the diagnostic readings on a particular interval, specify the
interval (in seconds) in this field. The default is 15 second updates.
 Read-only fields that appear with the diagnostic settings.
You can perform the following troubleshooting routines:

Check the Ethernet cable (page 61)

Retrieve the default password (page 63)
For more troubleshooting information, go to the ProSoft Technology web site at
www.prosoft-technology.com