ProSoft Technology RLX2-IHNF-WC User Manual
Page 33
RLX2 Industrial Hotspot Series
ProSoft Technology, Inc.
Page 33 of 212
June 15, 2015
The wire with the RJ45 connector is your Ethernet connection and supports Power over
Ethernet (PoE). If you are not using PoE, the other wire set is used to power the
module.
Note:
If you are using PoE to provide power to the module, the additional power cables
should be terminated inside the junction box during installation to prevent the wire
assembly from shorting out.
WARNING:
Do not connect or disconnect the PoE connection when energized.
This manual is related to the following products: