ProSoft Technology RLX2-IHNF-WC - Manual (Page 48)

RLX2 Industrial Hotspot Series
Page 48 of 212 ProSoft Technology, Inc.
June 15, 2015
 Consider drawing up the network plans on paper. As part of the drawing, assign a
logical name to each radio. These names can be assigned in the Radio Configuration
/ Diagnostic Utility.
 As part of the planning, a site survey may be helpful. You can hire ProSoft
Technology or a surveyor to perform a survey, or you can conduct the survey on
your own.
 Protect radios from direct exposure to weather, and provide an adequate, stable
power source. Make sure the plan complies with the radio’s power requirements
and cable specifications.
Important: Radios and antennas must be located at least 8 inches (20 cm) away from personnel.