ProSoft Technology RLX2-IHNF-WC - Manual (Page 126)

RLX2 Industrial Hotspot Series
Page 126 of 212 ProSoft Technology, Inc.
June 15, 2015
Primary Radio Functions
Performing the following primary functions on any listed radio is done by right-clicking
the radio name.
Connect (page 130): Log in to the Radio Configuration / Diagnostic Utility to configure a
radio or check diagnostics.
Assign IP (page 54, page 131): Assign a temporary IP address to a radio.
Update Firmware (page 132): Update the version of firmware the radio uses.
Start Ping Session (page 132): Sends a ping command to an address
Wireless Clients (page 134): View a list of client radios
Ethernet Nodes (page 135): View a list of wired Ethernet nodes connected to the
network
Scan List (page 136): View a list of all the radios detected on the network (including
those from other vendors)
Port Table (page 137): Lists of all the active ports on the radio
Event Log (page 138): Shows a history of the radio
Properties (page 139): View the selected radio’s properties.
In addition, there are more options in the File menu.
 Print either a list of the radios' properties or a topology view.