ProSoft Technology RLX2-IHNF-WC - Manual (Page 117)

RLX2 Industrial Hotspot Series
ProSoft Technology, Inc. Page 117 of 212
June 15, 2015
SNMP Agent Settings
SNMP is a network management protocol that is often used with TCP/IP and Ethernet.
As an alternative to using the Radio Configuration / Diagnostic Utility, changing radio
settings and viewing diagnostics can be done in an SNMP manager application.
Field
Description
Enable Enables the following SNMP Agent settings.
Allow Any Manager Allows any user to change the radio settings from any computer using SNMP.
Allow IP Restricts access to an SNMP manager with a particular IP address. Enter the
IP address in the Allow IP field.
Community String Enter a "community string" (essentially a password) that a manager must use
to access the radio’s SNMP agent.
Permission
Select the permission level to assign to this radio.
Read only An SNMP Agent can view but cannot modify radio settings.
Read/Write
An SNMP Agent can view and modify radio settings.
Save Saves the changes and updates the radio configuration.
Cancel Discards the changes without updating the radio configuration.
The RLX2 SNMP agent supports SNMP protocol version 1.4 and 2 MIBs:

RFC12133-MIB (partial; internet.mgmt.MIB-2.system, .interfaces, .snmp)

ROMAP-MIB (included on the DVD; internet.private.enterprises.romap)
It also supports a selection of standard SNMP traps, including Cold Start, which is sent
when the radio initializes.