Recommended antennas – ProSoft Technology RLX2-IHNF-WC User Manual
Page 5
5. The equipment shall be properly grounded with the external ground screw provided
connected to building ground as well as the antenna coaxial screen of the connector shall be
grounded.
6. Device must be powered by a Class 2 Power Source.
7. The common or earth side of the circuit side is connected to the screen of the coaxial cable
and to all accessible parts and circuits.
8. Shall be installed in Restricted Access Location Only.
9. Antennas are to be installed in accordance with Control Drawing 06/2514. You can find the
in the Antenna section of this manual.
Recommended Antennas
ProSoft offers a variety of Antennas and Cables for use with your RadioLinx device. The following is
a sample of available antennas.
For a complete list and description, please visit our website:
- Antennas and Accessories.
ProSoft Part Number
Max Gain and Type
A2403NBH-OC
3 dBi Omni N-BH jack whipless 2.4GHz
A2404NBHW-OC
4 dBi Omni N BH jack low profile 2.4GHz
A2404NJ-OC
4 dBi Omni N jack collinear with mounting hardware 2.4GHz
A2405S-OA
5 dBi Omni RP-SMA articulating 2.4GHz
A2405S-OM
5 dBi Omni RP-SMA straight w/magnetic base 2.4GHz
A2405S-OS
5 dBi Omni RP-SMA straight 2.4GHz
A2406NJ-OC
6 dBi Omni N jack collinear with mounting hardware 2.4GHz
A2406NJ-OCD
6dBi Omni N jack heavy duty collinear with mounting hardware 2.4GHz
A2406S3-DP
6dBi Panel RP-SMA MIMO antenna with 3 foot pigtail 2.4GHz
A2408NJ-DP
8 dBi Directional patch panel N jack with mounting hardware 2.4GHz
A2408NJ-OC
8 dBi Omni N jack collinear with mounting hardware 2.4GHz
A2409NJ-OCD
9 dBi Omni N jack heavy duty collinear with mounting hardware 2.4GHz
A2410NJ-DY
10 dBi Directional N jack Yagi with mounting hardware 2.4GHz
A2410NJ-OCM
10 dBi Omni N jack collinear for marine environment, 2.4GHz