Start here, Prolinx reference guide, Install prosoft configuration builder software – ProSoft Technology 5201-DFNT-DNPS User Manual
Page 9: Ge 9), 1 start here
Start Here
ProLinx DNPS ♦ ProLinx Gateway
User Manual
DNP 3.0 Slave
ProSoft Technology, Inc.
Page 9 of 86
December 1, 2009
1 Start
Here
In This Chapter
ProLinx Reference Guide ........................................................................9
Install ProSoft Configuration Builder Software.........................................9
Using ProSoft Configuration Builder...................................................... 10
DNPS Protocol Configuration ................................................................14
Download the Project to the Module...................................................... 28
For most applications, the installation and configuration steps described in this
section will work without additional programming. ProSoft Technology strongly
recommends that you complete the steps in this chapter before developing a
custom application.
1.1
ProLinx Reference Guide
The ProLinx Reference Guide on the ProSoft Solutions CD-ROM provides
detailed information on the entire range of ProLinx modules. If you have any
questions that are not answered in the DNPS User Manual, please refer to the
ProLinx Reference Guide.
1.2
Install ProSoft Configuration Builder Software
You must install the ProSoft Configuration Builder (PCB) software to configure
the gateway. You can always get the newest version of ProSoft Configuration
Builder from the ProSoft Technology web site.
To install ProSoft Configuration Builder from the ProSoft Web Site
1 Open your web browser and navigate to http://www.prosoft-
technology.com/pcb
2 Click the D
OWNLOAD
H
ERE
link to download the latest version of ProSoft
Configuration Builder.
3 Choose "S
AVE
"
or "S
AVE
F
ILE
"
when prompted.
4 Save the file to your Windows Desktop, so that you can find it easily when
you have finished downloading.
5 When the download is complete, locate and open the file, and then follow the
instructions on your screen to install the program.
If you do not have access to the Internet, you can install ProSoft Configuration
Builder from the ProSoft Solutions CD-ROM, included in the package with your
gateway.