ProSoft Technology 5201-DFNT-DNPS - Manual (Page 38)

ProLinx DNPS ♦ ProLinx Gateway Diagnostics and Troubleshooting
DNP 3.0 Slave User Manual
Page 38 of 86
ProSoft Technology, Inc.
December 1, 2009
Internal
Database
Address Variable Name Description
1013 DNP Slave Binary Input Event count This value contains the total number of
binary input events that have occurred.
1014 DNP Slave Analog Input Event
count This value contains the total number of
analog input events that have occurred.
1015 DNP Slave Float Input Event Count This value contains the total number of
float events that have occurred.
1016 DNP Slave Double Input Event
Count This value contains the total number of
double events that have occurred.
1017 DNP Slave bad function code error
(Application Layer Error) This value counts the number of times a
bad function code for a selected
object/variation is received by the slave
device.
1018 DNP Slave object unknown error
(Application Layer Error) This value counts the number of times a
request for an unsupported object is
received by the slave device.
1019 DNP Slave out of range error
(Application Layer Error) This value counts the number of times a
parameter in the qualifier, range or data
field is not valid or out of range.
1020 DNP Slave message overflow error
(Application Layer Error) This value counts the number of times an
application response message from the
slave is too long to transmit.
1021 DNP Slave multi-frame message
from DNP Master error (Application
Layer Error) This value counts the number of times
the slave receives a multi-frame
message from the master. The
application does not support multi-frame
master messages.
1022 Unsolicited Message Errors This value counts the number of
unsuccessful unsolicited messages
transmitted by the slave unit.
1023 Cycle Count This value is incremented each program
scan.
1024 DNP Slave synchronization error
count (Physical Layer Error) This value counts the number of times a
sync error occurs. The error occurs when
extra bytes are received before the start
bytes (0x05 and 0x64) are received.
1025 DNP Slave overrun error count
(Physical Layer Error) This value counts the number of times
the overrun error occurs. This error
occurs when the mainline Data Link
Layer routine cannot read the data
received on the communication port
before it is overwritten.
1026 DNP Slave length error count
(Physical Layer Error) This value counts the number of times an
invalid length byte is received. If the
length of the message does not match
the length value in the message, this
error occurs.
1027 DNP Slave bad CRC error (Data
Link Layer Error) This value counts the number of times a
bad CRC value is received in a
message.