ProSoft Technology PTQ-AFC User Manual
Page 52
Setting Up the ProTalk Module
PTQ-AFC ♦ Modicon Quantum Platform
User Manual
Liquid and Gas Flow Computer for Hydrocarbon Products
Page 52 of 259
ProSoft Technology, Inc.
June 23, 2011
5.1
Installing the ProTalk Module in the Quantum Rack
5.1.1 Verifying Jumper Settings
ProTalk modules are configured for RS-232 serial communications by default. To
use RS-422 or RS-485, you must change the jumpers.
The jumpers are located on the back of the module as shown in the following
illustration:
5.1.2 Inserting the 1454-9F connector
Insert the 1454-9F connector as shown. Wiring locations are shown in the table:
This manual is related to the following products: