ProSoft Technology PTQ-AFC User Manual
Page 25
PTQ-AFC ♦ Modicon Quantum Platform
Configuring the Processor with Unity Pro
Liquid and Gas Flow Computer for Hydrocarbon Products
User Manual
ProSoft Technology, Inc.
Page 25 of 259
June 23, 2011
2.4
Connect Your PC to the Processor
The next step is to connect to the processor so that you can download the project
file. The processor uses this project file to communicate over the backplane to
modules identified in the project file.
Note: If you have never connected from the PC to your processor before, you must verify that the
necessary port drivers are installed and available to Unity Pro.
To verify address and driver settings in Unity Pro
1
Open the PLC
menu, and choose S
TANDARD
M
ODE
. This action turns off the
PLC Simulator, and allows you to communicate directly with the Quantum or
Unity hardware.
2
Open the PLC
menu, and choose S
ET ADDRESS
...
This action opens the Set
Address
dialog box. Open the M
EDIA
dropdown list and choose the
connection type to use (TCPIP or USB).