ProSoft Technology MVI56E-MNETC - Manual (Page 94)

Guide to the MVI56E-MNETC User Manual MVI56E-MNETC ♦ ControlLogix Platform
User Manual Modbus TCP/IP Client Enhanced Communication Module
Page 94 of 183 ProSoft Technology, Inc.
February 3, 2013
1 Click the B ROWSE D EVICE ( S ) button to open the ProSoft Discovery Service.
Select the module, then right-click and choose S ELECT FOR PCB.
2 Close ProSoft Discovery Service, and click the C ONNECT button again.
3 If these troubleshooting steps fail, verify that the Ethernet cable is connected
properly between your computer and the module, either through a hub or
switch (using the grey cable) or directly between your computer and the
module (using the red cable).
If you are still not able to establish a connection, contact ProSoft Technology for
assistance.
4.2.1 Connecting to the Module's Web Page
The module's internal web server provides access to general product information,
firmware download link, and links to ProSoft Technology's Web site.
1 In ProSoft Discovery Service, select the module, and then click the right
mouse button to open a shortcut menu.