ProSoft Technology MVI56E-MNETC - Manual (Page 19)

MVI56E-MNETC ♦ ControlLogix Platform Start Here
Modbus TCP/IP Client Enhanced Communication Module User Manual
ProSoft Technology, Inc. Page 19 of 183
February 3, 2013
1.7 Creating a New RSLogix 5000 Project
1 Open the F ILE menu, and then choose N EW .
2 Select your ControlLogix controller model.
3 Select R
EVISION 20. You can select an earlier revision number if you have an
earlier version of RSLogix. There may be some small differences in the
appearance of dialog boxes from the ones shown in this Guide.
4 Enter a name for your controller, such as My_Controller.
5 Select your ControlLogix chassis type.
6 Select S
LOT 0 for the controller.