ProSoft Technology MVI56E-MNETC - Manual (Page 67)

MVI56E-MNETC ♦ ControlLogix Platform Configuring the MVI56E-MNETC Module
Modbus TCP/IP Client Enhanced Communication Module User Manual
ProSoft Technology, Inc. Page 67 of 183
February 3, 2013
1 In the Select Connection Type dropdown list, choose 1756-ENBT. The
default path appears in the text box, as shown in the following illustration.
2 Click CIP P ATH E DIT to open the CIPconnect Path Editor dialog box.
The CIPconnect Path Editor allows you to define the path between the PC and
the MVI56E-MNETC module. The first connection from the PC is always a 1756-
ENBT (Ethernet/IP) module.
Each row corresponds to a physical rack in the CIP path.
 If the MVI56E-MNETC module is located in the same rack as the first 1756-
ENBT module, select R ACK N O . 1 and configure the associated parameters.
 If the MVI56E-MNETC is available in a remote rack (accessible through
ControlNet or Ethernet/IP), include all racks (by using the A DD R ACK button).