ProSoft Technology MVI56E-MNETC - Manual (Page 107)

MVI56E-MNETC ♦ ControlLogix Platform Diagnostics and Troubleshooting
Modbus TCP/IP Client Enhanced Communication Module User Manual
ProSoft Technology, Inc. Page 107 of 183
February 3, 2013
Module Communication Error Codes
Code Description
-2 Timeout while transmitting message
-11 Timeout waiting for response after request (same as -36)
253 Incorrect slave/server address in response
254 Incorrect function code in response
255 Invalid CRC/LRC value in response
MNET Client Specific Errors
Code Description
-35 Invalid length of response message
-36 MNET command response timeout (same as -11)
-37 TCP/IP connection ended before session finished
Command List Entry Errors
Code Description
-40 Too few parameters
-41 Invalid enable code
-42 Internal address > maximum address
-43 Invalid node address (<0 or >255)
-44 Count parameter set to 0
-45 Invalid function code
-46 Invalid swap code
-3
3 Failed to connect to server specified in command
-4
7 ARP could not resolve MAC from IP (bad IP address, not part of a
network, invalid parameter to ARP routine).
-4
8
Error during ARP operation: the response to the ARP request did
not arrive to the module after a 5 second timeout.