ProSoft Technology MVI56-101S - Manual (Page 56)

Configuring the MVI56-101S Module MVI56-101S ♦ ControlLogix Platform
User Manual IEC 60870-5-101 Slave Communication Module
Page 56 of 193 ProSoft Technology, Inc.
August 2, 2011
2.7 [M_ST_NA_1]
This section defines the monitored step database. This information is sourced
from the database and is transferred to the remote Master unit.
This section takes the following parameters:
 P
OINT #
 DB
ADDRESS
 G
ROUPS
 IV DB B IT
Each point consumes one, 8-bit byte. The DB A DDRESS value corresponds to the
byte offset address in the database.
The DB ADDRESS should be located in a database area that is being constantly
moved from the module to the Master.
For additional information on how to set these parameters, see the Reference
chapter of this manual.