ProSoft Technology MVI56-101S - Manual (Page 142)

Reference MVI56-101S ♦ ControlLogix Platform
User Manual IEC 60870-5-101 Slave Communication Module
Page 142 of 193 ProSoft Technology, Inc.
August 2, 2011
The module calculates the Low Limit and High Limit values using the formula
below (so these values cannot be changed dynamically)
Low Limit = (LAST REPORTED VALUE) - Deadband
High Limit = (LAST REPORTED VALUE) + Deadband
These commands must be sent to a specific Information Object Address. The
module associates each monitor measured point with a parameter point through
the following configuration parameters: