ProSoft Technology MVI56-101S - Manual (Page 179)

MVI56-101S ♦ ControlLogix Platform IEC 60870-5-101 Slave Interoperability Statement
IEC 60870-5-101 Slave Communication Module User Manual
ProSoft Technology, Inc. Page 179 of 193
August 2, 2011
6.8.5 Double Transmission of Information Objects
(Station-specific parameter; mark each information type "X" where both a Type
ID without time and corresponding Type ID with time are issued in response to a
single spontaneous change of a monitored object)
The following type identifications may be transmitted in succession caused by a
single status change of an information object. The particular Information Object
Addresses for which double transmission is enabled are defined in a project-
specific list.
 Single-point information M_SP_NA_1, M_SP_TA_1, M_SP_TB_1 and
M_PS_NA_1
 Double-point information M_DP_NA_1, MDP_TA_1 and M_DP_TB_1
 Step position information M_ST_NA_1, M_ST_TA_1 and M_ST_TB_1
 Bitstring of 32 bit M_BO_NA_1, M_BO_TA_1 and M_BO_TB_1
 Measured value, normalized value M_ME_NA_1, M_ME_TA_1, M_ME_ND_1
and M_ME_TD_1
 Measured value, scaled value M_ME_NB_1, M_ME_TB_1 and M_ME_TE_1
 Measured value, short floating-point number M_ME_NC_1, M_ME_TC_1 and
M_ME_TF_1
6.8.6 Station Interrogation
(Station-specific parameter; mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
 global
 group
1  group 7  group 13
 group 2  group 8  group l4
 group 3  group 9  group 15
 group 4  group 10    group 16
 group 5  group 11
 group 6  group 12
6.8.7 Clock Synchronization
(Station-specific parameter; mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
 Clock
synchronization
 Day of week used
 RES1, GEN (time tag substituted/not substituted) used
 SU-bit (summertime) used (Optional)