ProSoft Technology MVI56-101S - Manual (Page 134)

Reference MVI56-101S ♦ ControlLogix Platform
User Manual IEC 60870-5-101 Slave Communication Module
Page 134 of 193 ProSoft Technology, Inc.
August 2, 2011
C_SC_NA and C_DC_NA
The single-point command and dual-point command points use one bit with bit-
addressing. For example, if you configure the following points:
The following table describes how these points would be used.
Inf. Object Address Module Database Address
100 Bit 0 of word 100
101 Bit 1 of word 100
102 Bit 2 of word 100
The protocol specification defines a qualifier value that is set by the Master to
determine the duration of the pulse (short, long or persistent). Configure the
Short Pulse Time and Long Pulse Time parameters, seen below, to set the
duration of the short and long pulses: