ProSoft Technology MVI56-101S - Manual (Page 54)

Configuring the MVI56-101S Module MVI56-101S ♦ ControlLogix Platform
User Manual IEC 60870-5-101 Slave Communication Module
Page 54 of 193 ProSoft Technology, Inc.
August 2, 2011
2.5 [M_SP_NA_1]
This section defines the monitored single-point database. This information is
sourced from the database and is transferred to the remote Master unit.
This section takes the following parameters:
 P
OINT #
 DB
ADDRESS
 G
ROUPS
 IV
DB B IT
Each point consumes one bit (1 = On, 0 = Off state). The DB A DDRESS VALUE
corresponds to the bit offset address in the database.
The DB ADDRESS should be located in a database area that is being constantly
moved from the module to the Master.
For additional information on how to set these parameters, see the Reference
chapter of this manual.