PLANET ADN-4000 - Manual (Page 79)

The following table describes the labels in this screen.
Parameter Description
Current Firmware Version The current firmware version will be shown here.
New Firmware Location Type in the location of the new firmware or click
"Browse" to find it.
New Romfile Location To restore the backup settings, please type in the
location of the backup file or click "Browse" to
find it.
Romfile Backup To save the current settings as a backup file, please
click "ROMFILE SAVE". Then please change
the file name and select the location you want to
save the file.
Upgrade Click "Upgrade" to begin the upgrade processes or
backup file restoring processes. After the router is
restarted, the processes are completed. It might
take several minutes, don't power off the router
during upgrading or restoring.
3.7.4 SysRestart
Go to Maintenance->SysRestart to do system restart.
The SysRestart screen allows you to restart your router with either its current settings
still in place or the factory default settings.
The following table describes the labels in this screen.
Parameter Description
79