PLANET ADN-4000 - Manual (Page 31)

3.4.2 LAN Configuration
Go to Interface Setup -> LAN. The LAN option enables you to configure the LAN
port.
There are the IP settings of the LAN Interface for the device. These settings may be
referred to as Private settings. You may change the LAN IP address if needed. The
LAN IP address is provided to your internal network and cannot be seen on the Internet.
3.4.2.1 Router Local IP
IP Address: Enter the IP address of your ADSL router in dotted decimal notation, for
example, 192.168.1.1 (default setting).
IP Subnet Mask: Your ADSL router will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing sub netting, use
the subnet mask computed by the ADSL router.
Dynamic Route: Select the Dynamic Route from RIP1, RIP2-B, and RIP2-M. Please
refer to Dynamic Routing . The only difference is the interface.
31