PLANET ADN-4000 - Manual (Page 77)

server is set, you will only need to set the time zone. If you manually set the time, you
may also set Daylight Saving dates and the system time will automatically adjust on
those dates.
The following table describes the labels in this screen.
Parameter Description
Current Date/Time
This field displays an updated Date and Time
when you reenter this menu.
[Time Synchronization]
Synchronize time with You can choose "NTP Server automatically",
"PC’s Clock", or "Manually" to coordinate the
time.
Time Zone Choose the Time Zone of your location. This will
set the time difference between your time zone
and Greenwich Mean Time (GMT).
Daylight Saving Choose "Enabled" or "Disabled" to use daylight
savings time.
NTP Server Address Type the IP address or domain name of your
timeserver. Check with your ISP/network
administrator if you are unsure of this
77