2 action – PLANET ADN-4000 User Manual

Page 59

Source Mask

Set the subnet mask value that you want to filter in source

side

Source Port Range

Set the port range value that you want to filter in source side

Protocol ID

Set the protocol ID type that you want to filter

Vlan ID Range

Set the VLAN value that you want to filter

IPP/DS Field

Select IP QoS format

IP Precedence Range

Select the IP precedence range

Type of Service

Select 5 different type of service

DSCP Range

Set the DSCP value that you want to filter

802.1p

Set the remarked new 802.1p priority value on the packet that

fulfill every detail setting condition of each rule

3.5.4.2 Action

After finishing all rules detail condition setting, select the rule you want to execute and

action here.

The following table describes the labels in this screen.

Parameter Description

IPP/DS Field

Select IP QoS format

IP Precedence

Remarking

Select the remarking value of IP precedence

Type of service

Remarking

Select the remarking value of type of service

DSCP Remarking

Select the remarking value of DSCP

802.1p Remarking

Select the remarking value of 802.1p

Queue #

Select four types of Queue: Low, Medium, High,

Highest