PLANET ADN-4000 - Manual (Page 26)

VPI Enter your VPI number here.
VCI Enter your VCI number here.
ATM QoS Select the QoS type for the PVC in question from the dropdown
list.
PCR Enter the PCR here. For all QoS types.
SCR Enter the SCR here. Only for rtVBR and nrtVBR.
MBS Enter the MBS here. Only for rtVBR and nrtVBR.
3.4.1.3 Encapsulation
Select the encapsulation protocol your ISP uses. The following section will vary
depending on which encapsulation protocol you select.
The following table describes the labels in this screen.
Parameter Description
Dynamic IP Address Obtain an IP address automatically from your service
provider.
Static IP Address Uses a static IP address. Your service provider gives a static
IP address to access Internet services.
PPPoE/PPPoA PPPoE (PPP over Ethernet) and PPPoA (PPP over ATM)
are common connection methods used for xDSL.
Bridge Mode Bridge Mode is a common connection method used for
xDSL modem.
(1) Dynamic IP Address
Select this option if your ISP provides you an IP address automatically. Please enter the
Dynamic IP information accordingly.
26