PLANET ADN-4000 - Manual (Page 54)

The following table describes the labels in this screen.
Parameter Description
DMZ setting for Show the DMZ setting is for single or multiple IP
Addresses.
DMZ Enable or disable the DMZ function.
DMZ Host IP Address Enter a static IP Address to the DMZ Host. This IP
Address will be exposed to the Internet.
When you are done making changes, click on SAVE to save your changes or on BACK
to return to the previous screen.
3.5.3.3 IP Address Mapping
Go to Advanced Setup ->NAT -> Multiple ->IP Address mapping to set IP
Address mapping parameters.
The IP Address Mapping is for those VCs that with multiple IPs. The IP Address
Mapping rule is per-VC based. (Only for Multiple IPs’ VCs).
54