PLANET ADN-4000 - Manual (Page 55)

The following table describes the labels in this screen.
Parameter Description
Address Mapping Rule Show the Address Mapping for single or multiple
IP Addresses.
Rule Index Choose the rule number.
Rule Type There are 4 types of One-to-One , Many-to-One,
Many-to-Many Overload , and Many-to Many
No-Overload .
Local Start & End IP Enter the local IP address you plan to map to.
Local Start IP is the starting local IP address &
Local End IP is the ending local IP address. If the
rule is for all local IPs, then the Start IP is 0.0.0.0
and the End IP is 255.255.255.255.
Public Start & End IP
Enter the Public IP Address you want to do NAT.
Public Start IP is the starting Public IP Address
and Public End IP is the ending Public IP
Address. If you have a Dynamic IP, enter 0.0.0.0
as the Public Start IP.
55