PLANET ADN-4000 - Manual (Page 76)

3.7 Maintenance
3.7.1 Administration
Go to Maintenance-> Administration to set a new user's name and password to
restrict management access to the router.
The default is admin (User's name) and admin (Password)
The following table describes the labels in this screen.
Parameter Description
New Password Type the new password in this field.
Confirm Password Type the new password again in this field.
Note: If you ever forget the password to log in, you may press the RESET button up to
6 second to restore the factory default settings. The Factory Default Settings for User
Name & Password are admin & admin .
3.7.2 Time Zone
Go to Maintenance->Time Zone and select system time as you wish.
The system time is the time used by the device for scheduling services. You can
manually set the time or connect to a NTP (Network Time Protocol) server. If an NTP
76