PLANET ADN-4000 - Manual (Page 58)

The following table describes the labels in this screen.
Parameters Description
Rule Index Select 16 different rules, each rule’s detail can be set and
saved
Active Select QoS is activated or deactivated
Application Select 11 different applications: IGMP, SIP, H.323, MGCP,
SNMP, DNS, DHCP, RIP, RSTP, RTCP, RTP
Physical Ports Once you select the application, the associated ports will be
displayed
Destination MAC Set the Ethernet MAC value that you want to filter in
destination side
Destination IP Set the IP address value that you want to filter in destination
side
Destination Mask Set the subnet mask value that you want to filter in
destination side
Destination Port
Range
Set the port range value that you want to filter in destination
side
Source MAC Set the Ethernet MAC value that you want to filter in source
side
Source IP Set the IP address value that you want to filter in source side
58