PLANET ADN-4000 User Manual

Page 28

The following table describes the labels in this screen.

Parameter Description

Encapsulation

Select your encapsulation type from the dropdown list.

Static IP Address

Enter the static IP Address here.

IP Subnet Mask

Enter the IP Subnet Mask here.

Gateway

Enter the Gateway address here.

NAT

Select whether NAT is Enabled or Disabled.

Default Route

Select whether this PVC will be the default route for

Internet data.

Dynamic Route

Select the RIP type and direction from the dropdown lists.

Multicast

Select the multicast protocol you wish to use from the

dropdown list.

(3) PPPoA / PPPoE

Select this option if your ISP requires you to use a PPPoE connection. This option is

typically used for DSL service. Select Dynamic PPPoE to obtain an IP address

automatically for your PPPoE connection. Selection Static PPPoE to use static IP

address for your PPPoE connection. Please enter the information accordingly.