PLANET ADN-4000 User Manual

Page 27

The following table describes the labels in this screen.

Parameter Description

Encapsulation

Select your encapsulation type from the dropdown list.

NAT

Select whether NAT is Enabled or Disabled.

Default Route

Select whether this PVC will be the default route for

Internet data.

TCP MTU Option

Enter TCP MTU Value here

Dynamic Route

Select the RIP type and direction from the dropdown lists.

Multicast

Select the multicast protocol you wish to use from the

dropdown list.

(2) Static IP Address

Select this option to set static IP information. You will need to enter in the

encapsulation type (1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP

LLC (IPoA), 1483 Routed IP VC-Mux), IP address, subnet mask, and gateway address

provided to you by your ISP. Each IP address entered in the fields must be in the

appropriate IP form, which is 4 IP octets separated by a dot (x.x.x.x). The Router will

not accept the IP address if it is not in this format.