PLANET WNAP-7206 - Manual (Page 57)

User Manual of WNAP-7206
-49-
Object Description
 WAN Connections Select PPTP/Russia PPTP from the list.
 User Name
 Password
Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
 Dynamic IP/ Static IP
Choose either one as you are given by your ISP. Click the
Connect button to connect immediately. Click the Disconnect
button to disconnect immediately.
 Server IP
Address/Name
Enter the Server IP address or domain name provided by your
ISP.
 IP Address
Enter the IP address used for dial-up. (Only can be configured
when Static IP is selected)
 Subnet Mask
Enter the subnet Mask provided by your ISP. (Only can be
configured when Static IP is selected)
 Gateway
Enter gateway provided by your ISP. (Only can be configured
when Static IP is selected)
 DNS
Enter DNS Server provided by your ISP. (Only can be
configured when Static IP is selected)
 Internet IP Address The Internet IP address assigned by PPTP server.
 Internet DNS The Internet DNS server address assigned by PPTP server.
 MTU Size (in bytes)
The default MTU (Maximum Transmission Unit) value is 1420
Bytes. For some ISPs you need to modify the MTU. But this is
rarely required, and should not be done unless you are sure it
is necessary for your ISP connection.
 Max Idle Time
You can configure the Device to disconnect from your Internet
connection after a specified period of inactivity (Max Idle Time).
If you want your Internet connection to remain active at all time,
enter 0 in the Max Idle Time field. Otherwise, enter the number
of minutes you want to have elapsed before your Internet
connection terminates.
 Connect on Demand
If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Device to
automatically re-establish your connection as soon as you
attempt to access the Internet again. If you wish to activate
Connect on Demand, check the radio button.
 Connect Automatically
Connect automatically after the Device is disconnected. To use
this option, check the radio button.
 Connect Manually
You can configure the Device to make it connect or disconnect
manually. After a specified period of inactivity (Max Idle Time),
the Device will disconnect from your Internet connection, and
you will not be able to re-establish your connection
automatically as soon as you attempt to access the Internet
again. To use this option, check the radio button. If you want