PLANET WNAP-7206 - Manual (Page 129)

User Manual of WNAP-7206
-121-
5.11.2 Host
Choose menu “Access Control > Host”, and then you can view and set a Host list in the screen as shown in
Figure 5-11-2-1 . The host list is necessary for the Access Control Rule.
Figure 5-11-2-1 Host Setting
The page includes the following fields:
Object Description
 Host Description Here displays the description of the host and this description is unique.
 Information Here displays the information about the host. It can be IP or MAC.
 Modify To modify or delete an existing entry.
 Add New... Click the Add New... button to add a new host entry.
 Delete All Click the Delete All button to delete all entries.
 Next Click the Next button to go to the next page.
 Previous Click the Previous button return to the previous page.
 Mode
Here are two options, IP Address and Domain Name. You can choose
either of them from the drop-down list.
 LAN IP Address
If the IP Address Mode is selected, you can see the following item:
IP Address - Enter the IP address (or address range) of the host in
dotted-decimal format, for example 192.168.1.23.
 MAC Address
If the MAC Address Mode is selected, you can see the following item:
MAC Address - Enter the MAC address of the host in
XX-XX-XX-XX-XX-XX format, for example 00-11-22-33-44-AA.