PLANET WNAP-7206 - Manual (Page 128)

User Manual of WNAP-7206
-120-
Object Description
 Enable Internet able the Internet Access Control
Access Control
Select the check box to en
function, and then the Default Filter Policy can take effect.
 Rule Name Here displays the name of the rule and this name is unique.
 Host Here displays the host selected in the corresponding rule.
 Target Here displays the target selected in the corresponding rule.
 Schedule e. Here displays the schedule selected in the corresponding rul
 Action
ts. Here displays the action the Device takes to deal with the packe
It could be Allow or Deny. Allow means that the Device permits
the packets to go through the Device. Deny means that the Device
rejects the packets to go through the Device.
 Status
led means the rule This field displays the status of the rule. Enab
will take effect, Disabled means the rule will not take effect.
 Modify Here you can edit or delete an existing rule.
 Add New... entry. Click the Add New... button to add a new host
 Enable All Click the Enable All button to enable all the rules in the list.
 Disable All Click the Disable All button to disable all the rules in the list.
 Delete All Click the Delete All button to delete all the entries in the table.
 Next Click the Next button to go to the next page.
 Previous us page. Click the Previous button return to the previo
 Rule Name
e should be In this field, create a name for the rule. Note that this nam
unique.
 Host ld, select a host from the drop-down list for the rule. In this fie
 Target
. The In this filed, select a target from the drop-down list for the rule
default value is Any Target.
 Schedule
le from the drop-down list for the rule. In this field, select a schedu
The default value is Anytime.
 Action
ions, Allow or Deny. Allow means In this field, there are two opt
the Router permits the packets to go through the Router. Deny
means the Router rejects the packets to go through the Router.
 Status
ct In this field, there are two options, Enable or Disable. Sele
Enable so that the rule will take effect. Select Disable so that the
rule won't take effect.
 Save to save the changes. Click the Save button
 Back Click the Back button to back to the previous page.