PLANET WNAP-7206 - Manual (Page 121)

User Manual of WNAP-7206
-113-
5.9.2 Advanced Security
Choose menu “Security > Advanced Security”, and then you can protect the Device from being attacked by
ICMP-Flood, UDP Flood and TCP-SYN Flood in the screen as shown in Figure 5-9-2-1 .
Figure 5-9-2-1 Advanced Security Settings
The page includes the following fields:
Object Description
 Packets Statistics
interval (5~60)
The default value is 10. Select a value between 5 and 60 seconds
in the pull-down list. The Packets Statistic interval value indicates
the time section of the packets statistic. The result of the statistic
used for analysis by ICMP-Flood, UDP Flood and TCP-SYN Flood.
 DoS Protection
Enable or Disable the DoS protection function. Only when it is
enabled, will the flood filters be enabled.
 Enable
ICMP-FLOOD
Attack Filtering Enable or Disable the ICMP-FLOOD Attack Filtering.
 ICMP-FLOOD
Packets Threshold
(5~3600)
The default value is 50. Enter a value between 5 ~ 3600. When the
current ICMP-FLOOD Packets number is beyond the set value, the
Device will start up the blocking function immediately.