beautypg.com

PLANET WNAP-7206 User Manual

Page 23

background image

User Manual of WNAP-7206

-15-

Figure 3-4

DC: Insert adapter

POE: This hole is linked to LAN port of the WNAP-7206 with RJ-45 Ethernet cable.

LAN: This hole is linked to LAN port of PC/Hub or Router/xDSL modem device with RJ-45 Ethernet cable.

Step 5. Successful installation.

Figure 3-5

It will take about 50 seconds to complete the boot up sequence after powered on

the Outdoor AP/Router; Power LED will be active, and after that the LAN Activity

LED will be flashing to show the LAN interface is enabled and working now.

To avoid thunder strike, consider to install ELA-100, thunder arrester toward the

CPE AP and the PoE injector.