PLANET WNAP-7206 - Manual (Page 141)

User Manual of WNAP-7206
-133-
Figure 5-15-3
Step 4. Go to “Network-> WAN” to configure WAN Connection using Static (Fixed IP).
Figure 5-15-4
Step 5. Save the settings, and connect your WAN port of the Wireless AP to the internet by Ethernet cable.
Step 6. In a remote computer, enter the DDNS host name as the figure shown as below. Then, you should be
able to login the WNAP-7350 remotely.
Please remember to enter the remote management port number that you have configured in Step 3
except port 80.
Figure 5-15-5