PLANET WNAP-7206 - Manual (Page 122)

User Manual of WNAP-7206
-114-
 Enable
UDP-FLOOD
Filtering Enable or Disable the UDP-FLOOD Filtering.
 UDP-FLOOD
Packets Threshold
(5~3600)
The default value is 500. Enter a value between 5 ~ 3600. When
the current UPD-FLOOD Packets number is beyond the set value,
the Device will start up the blocking function immediately.
 Enable
TCP-SYN-FLOOD
Attack Filtering Enable or Disable the TCP-SYN-FLOOD Attack Filtering.
 TCP-SYN-FLOOD
Packets Threshold
(5~3600)
The default value is 50. Enter a value between 5 ~ 3600. When the
current TCP-SYN-FLOOD Packets numbers is beyond the set
value, the Device will start up the blocking function immediately.
 Ignore Ping Packet
From WAN Port
Enable or Disable Ignore Ping Packet From WAN Port. The default
setting is Disabled. If enabled, the ping packet from Internet cannot
access the Device.
 Forbid Ping Packet
From LAN Port
Enable or Disable Forbid Ping Packet From LAN Port. The default
setting is Disabled. If enabled, the ping packet from LAN cannot
access the Device and defend against some viruses.
 Save Click the Save button to save the settings.
 Blocked DoS Host
List
Click the Blocked DoS Host List button to display the DoS host
table by blocking.
FLOOD Filtering will take effect only when the Traffic Statistics in System Tools
is enabled.