PLANET WNAP-7206 - Manual (Page 34)

User Manual of WNAP-7206
-26-
Figure 5-1-2 Status
This section allows you to view the AP’s System info listed below:
Object Description
 Firmware Version The current firmware version of the AP.
 Hardware Version The current hardware version of the AP.
LAN
 MAC Address The physical address of the system, as seen from the LAN.
 IP Address The IP address of the wired LAN.
 Subnet Mask The subnet mask associated with IP address.
Wireless
 Wireless Radio
Indicates whether the wireless radio feature of the Device is
enabled or disabled.
 Wireless AP Mode
The current wireless AP mode which the AP works on.
This field is only available in AP Router Mode.
 Name (SSID) The SSID of the Device.
 Channel The current wireless channel in use.
 Mode The current wireless mode which the AP works on.
 Max Tx Rate The maximum Transmitting Rate.
 MAC Address The physical address of the AP, as seen from the WLAN.
 Client Status
The status of client. This field is only available in AP Client
Mode.

Init: Connection is down;
 Scan: Try to find the AP;